Epoxy HR is a 2-pack epoxy coating that can withstand high termperatures up to 205º C, and can be applied on hot substrates of up to 150ºC. Offering excellent long-term corrosion protection, Jotun Epoxy HR can be used as a primer, mid-coat or finish coat on properly prepared carbon steel, galvanised steel, stainless steel, and aluminium substrates.
Available from SML Paints in Light Grey or Aluminium colours
Epoxy HR is a 2-pack epoxy coating that can withstand high termperatures up to 205º C, and can be applied on hot substrates of up to 150ºC. Offering excellent long-term corrosion protection, Jotun Epoxy HR can be used as a primer, mid-coat or finish coat on properly prepared carbon steel, galvanised steel, stainless steel, and aluminium substrates.
Available from SML Paints in Light Grey or Aluminium colours
Select an Option Below
Please choose an option first.
| Feature | Details |
|---|---|
| Brand | Jotun |
| Paint Protection | Heat-Resistant |
| Paint Type | Universal Coating |
| Paint Components | 2-Pack |
| Ease of Use | 3. Good |
| Substrate Suitability | Stainless Steel, Mild Steel, Galvanised Steel, Concrete, Aluminium |
| Surface Adhesion | 2. Very Good |
| Above / Below Waterline | Above Water |
| Water Resistance | 3. Good |
| Abrasion Resistance | 3. Good |
| Chemical Resistance | 1. Excellent |
| Solvent Resistance | 1. Excellent |
| Interior / Exterior Use | Exterior, Interior |
| UV Resistance | 4. Fair |
| Gloss Level | 5. Matt |
| Gloss Retention | 4. Fair |
| Colour Retention | 4. Fair |
| Flexibility | 4. Fair |
| Application Method | Airless Spray, Brush, Roller |
| Recommended Coats (Brush / Roller) | 1-2 |
| Chemical Composition | Epoxy |
| Brand Range | Epoxy HR |
| Brush or Roller Coverage Rate (m2 / L) | 7 |
| Cured for Service 10C (days) | 21 |
| Cured for Service 23C (days) | 7 |
| Dry to Overcoat 10C (hours) | 26 |
| Dry to Overcoat 23C (hours) | 10 |
| Full Curing Time 10C (days) | 21 |
| Full Curing Time 23C (days) | 7 |
| Max Dry Film Thickness per Coat (microns) | 200 |
| Max Overcoating Time without Sanding (days) | Refer to data sheet |
| Min Dry Film Thickness per Coat (microns) | 100 |
| Pot Life 10C (hours) | 6 |
| Pot Life 23C (hours) | 4 |
| Product Type | Paint |
| Self-Priming | No |
