Jotun Penguard HSP is a fast drying, high solids two-pack epoxy coating designed to provide corrosion protection to steel in an urban and industrial atmospheres. Penguard HSP is ideal for use where a fast dry-to-recoat and / or a fast dry-to-handle time is required.
Jotun Penguard HSP is a fast drying, high solids two-pack epoxy coating designed to provide corrosion protection to steel in an urban and industrial atmospheres. Penguard HSP is ideal for use where a fast dry-to-recoat and / or a fast dry-to-handle time is required.
Select an Option Below
| Feature | Details |
|---|---|
| Brand | Jotun |
| Paint Protection | Anti-Corrosive |
| Paint Type | Primer |
| Paint Components | 2-Pack |
| Ease of Use | 3. Good |
| Substrate Suitability | Stainless Steel, Mild Steel, GRP, Galvanised Steel, Concrete, Aluminium |
| Surface Adhesion | 1. Excellent |
| Above / Below Waterline | Above Water |
| Water Resistance | 2. Very Good |
| Abrasion Resistance | 2. Very Good |
| Chemical Resistance | 1. Excellent |
| Solvent Resistance | 1. Excellent |
| Interior / Exterior Use | Exterior |
| UV Resistance | 4. Fair |
| Gloss Level | 5. Matt |
| Gloss Retention | 4. Fair |
| Colour Retention | 4. Fair |
| Flexibility | 3. Good |
| Application Method | Airless Spray, Brush, Roller |
| Recommended Coats (Brush / Roller) | 2-3 |
| Chemical Composition | Epoxy |
| Brand Range | Penguard |
| Brush or Roller Coverage Rate (m2 / L) | 8 |
| Cured for Service 10C (days) | 8 |
| Cured for Service 23C (days) | 4 |
| Dry to Overcoat 10C (hours) | 4 |
| Dry to Overcoat 23C (hours) | 2 |
| Full Curing Time 10C (days) | 8 |
| Full Curing Time 23C (days) | 4 |
| Max Dry Film Thickness per Coat (microns) | 250 |
| Max Overcoating Time without Sanding (days) | Refer to data sheet |
| Min Dry Film Thickness per Coat (microns) | 60 |
| Pot Life 10C (hours) | 3 |
| Pot Life 23C (hours) | 2 |
| Product Type | Paint |
| Self-Priming | No |
