SML Shield Underwater Primer is a specially formulated primer offering great value for money for use below the waterline under CU-PRO Premium Antifouling. It can also be used to seal over existing antifouling or direct to mild steel, wood or ferro cement.
Available from SML Paints in 2.5L tins
- Single pack acrylic tiecoat
- Great value for money
- Excellent surface adhesion
- Very good flexibility
- Very good water resistance
- Fast drying
- For use under Cu-Pro antifoul
- Sealing existing antifoul
- Primer for mild steel, wood, concrete
Shield Underwater Primer 2.5L
SML Shield Underwater Primer is a specially formulated primer offering great value for money for use below the waterline under CU-PRO Premium Antifouling. It can also be used to seal over existing antifouling or direct to mild steel, wood or ferro cement.
Available from SML Paints in 2.5L tins
- Single pack acrylic tiecoat
- Great value for money
- Excellent surface adhesion
- Very good flexibility
- Very good water resistance
- Fast drying
- For use under Cu-Pro antifoul
- Sealing existing antifoul
- Primer for mild steel, wood, concrete
In Stock - Same day dispatch available
£28.55
excl. VAT
£34.26
incl. VAT
In Stock - Same day dispatch available
Specifications
| Feature | Details |
|---|---|
| Brand | SML |
| Paint Protection | Antifouling |
| Paint Type | Tie-Coat |
| Paint Components | Single Pack |
| Ease of Use | 3. Good |
| Substrate Suitability | Wood, Mild Steel, Concrete |
| Surface Adhesion | 1. Excellent |
| Above / Below Waterline | Below Water |
| Water Resistance | 2. Very Good |
| Abrasion Resistance | 3. Good |
| Chemical Resistance | 5. Limited |
| Solvent Resistance | 5. Limited |
| Interior / Exterior Use | Exterior |
| Flexibility | 2. Very Good |
| Application Method | Roller, Brush, Airless Spray |
| Recommended Coats (Brush / Roller) | 1 |
| Chemical Composition | Acrylic |
| Brand Range | Shield |
| Brush or Roller Coverage Rate (m2 / L) | 10 |
| Cured for Service 10C (days) | 1 |
| Cured for Service 23C (days) | 1 |
| Dry to Overcoat 10C (hours) | 3 |
| Dry to Overcoat 23C (hours) | 2 |
| Full Curing Time 10C (days) | 1 |
| Full Curing Time 23C (days) | 1 |
| Max Dry Film Thickness per Coat (microns) | 100 |
| Max Overcoating Time without Sanding (days) | Extended |
| Min Dry Film Thickness per Coat (microns) | 35 |
| Product Type | Paint |
| Self-Priming | No |
